Simulation with non-local behavior

Foundations of physics and/or philosophy of physics, and in particular, posts on unresolved or controversial issues

Simulation with non-local behavior

Postby FrediFizzx » Sun Feb 09, 2020 1:48 pm

Looks like it might be possible to predict individual outcomes event by event with grossly non-local behavior. It is a non-local hidden variable model with 720 degrees of data at 1 degree resolution.

Image

Here is a PDF of the Mathematica simulation,

EPRsims/non-local.pdf

The only problem with this is that output A is a coin toss variable. So you have to know a, b, lambda and A to predict the correct outcome for B. Don't know if this actually relates to quantum mechanics in any way.
.
FrediFizzx
Independent Physics Researcher
 
Posts: 2905
Joined: Tue Mar 19, 2013 7:12 pm
Location: N. California, USA

Re: Simulation with non-local behavior

Postby FrediFizzx » Sun Feb 09, 2020 2:37 pm

Well..., we can just do A the regular way implementing the polarizer function where e is the A particle vector. So if you know a, b, e and lambda, you can predict the A and B outcomes. Here is the updated code.

EPRsims/non-local2.pdf
.
FrediFizzx
Independent Physics Researcher
 
Posts: 2905
Joined: Tue Mar 19, 2013 7:12 pm
Location: N. California, USA

Re: Simulation with non-local behavior

Postby Joy Christian » Sun Feb 09, 2020 2:44 pm

***
This is of course not surprising. In 1964 Bell already noted that nonlocal models can reproduce the strong correlation:

Image
***
Joy Christian
Research Physicist
 
Posts: 2793
Joined: Wed Feb 05, 2014 4:49 am
Location: Oxford, United Kingdom

Re: Simulation with non-local behavior

Postby FrediFizzx » Sun Feb 09, 2020 3:04 pm

Joy Christian wrote:***
This is of course not surprising. In 1964 Bell already noted that nonlocal models can reproduce the strong correlation:

Image
***

Not quite the same thing. We can predict the individual A and B outcomes event by event to produce -a.b. Plus this is a HV non-local model. I mainly did this simulation to see if there might be a clue for local behavior.
.
FrediFizzx
Independent Physics Researcher
 
Posts: 2905
Joined: Tue Mar 19, 2013 7:12 pm
Location: N. California, USA

Re: Simulation with non-local behavior

Postby Joy Christian » Sun Feb 09, 2020 3:31 pm

FrediFizzx wrote:
Joy Christian wrote:***
This is of course not surprising. In 1964 Bell already noted that nonlocal models can reproduce the strong correlation:

Image
***

Not quite the same thing. We can predict the individual A and B outcomes event by event to produce -a.b. Plus this is a HV non-local model. I mainly did this simulation to see if there might be a clue for local behavior.

It is the same thing. Bell's local model of 1964 he is referring to in the above paragraph predicts individual A and B outcomes event-by-event. About ten years ago someone simulated its nonlocal version for me to convince me that only nonlocal models can reproduce the -a.b correlations, and rather easily. I continued working on my 3-sphere model regardless.

***
Joy Christian
Research Physicist
 
Posts: 2793
Joined: Wed Feb 05, 2014 4:49 am
Location: Oxford, United Kingdom

Re: Simulation with non-local behavior

Postby FrediFizzx » Sun Feb 09, 2020 5:30 pm

Joy Christian wrote:… It is the same thing. Bell's local model of 1964 he is referring to in the above paragraph predicts individual A and B outcomes event-by-event. About ten years ago someone simulated its nonlocal version for me to convince me that only nonlocal models can reproduce the -a.b correlations, and rather easily. I continued working on my 3-sphere model regardless.

***

It looks like to me that with Bell's configuration, you will get straight lines event by event instead of the negative cosine curve. Bell's HV is just the particle spin vector. You need this function,



with lambda random 0 to 1 to produce the negative cosine curve. But it is complete nonsense anyways. Not only does station B know A's angle, it also knows A's outcome. Very un-Natural.
.
FrediFizzx
Independent Physics Researcher
 
Posts: 2905
Joined: Tue Mar 19, 2013 7:12 pm
Location: N. California, USA

Re: Simulation with non-local behavior

Postby Guest » Mon Feb 10, 2020 12:16 am

FrediFizzx wrote:It looks like to me that with Bell's configuration, you will get straight lines event by event instead of the negative cosine curve. Bell's HV is just the particle spin vector. You need this function,

with lambda random 0 to 1 to produce the negative cosine curve. But it is complete nonsense anyway. Not only does station B know A's angle, but it also knows A's outcome. Very un-Natural.

I like your model, Fred. It's elegant, one of the most elegant of this type that I have seen.

Some other people with models like this, but much more complex, are Anthony Crofts (Illinois) and David Oaknin (Haifa).
http://www.life.illinois.edu/crofts/
http://www.life.illinois.edu/crofts/Bell_Ineq/
https://www.researchgate.net/profile/David_Oaknin
https://arxiv.org/abs/1411.5704
Guest
 

Re: Simulation with non-local behavior

Postby FrediFizzx » Mon Feb 10, 2020 2:45 pm

Guest wrote:
FrediFizzx wrote:It looks like to me that with Bell's configuration, you will get straight lines event by event instead of the negative cosine curve. Bell's HV is just the particle spin vector. You need this function,

with lambda random 0 to 1 to produce the negative cosine curve. But it is complete nonsense anyway. Not only does station B know A's angle, but it also knows A's outcome. Very un-Natural.

I like your model, Fred. It's elegant, one of the most elegant of this type that I have seen.

Some other people with models like this, but much more complex, are Anthony Crofts (Illinois) and David Oaknin (Haifa).
http://www.life.illinois.edu/crofts/
http://www.life.illinois.edu/crofts/Bell_Ineq/
https://www.researchgate.net/profile/David_Oaknin
https://arxiv.org/abs/1411.5704

Thanks. It is probably the most simple non-local HV model that can produce the negative cosine curve event by event and completely predictable if you know all the 4 variables. The simple function is adapted from Vongehr's QRC quantum model. I had to divide (b - a) by 2 to get it to work properly. You can see from the plot that the tails of the curve didn't quite come in all the way. I suspect that is just due to there not being enough data for complete averaging as you can see from what I did at the end of the code. But this gives me some ideas to try for a local HV model.

Oaknin's model is ridiculously complex and it looks like the HV's depend somewhat on (b - a). I will check out what Crofts did.
.
FrediFizzx
Independent Physics Researcher
 
Posts: 2905
Joined: Tue Mar 19, 2013 7:12 pm
Location: N. California, USA

Re: Simulation with non-local behavior

Postby minkwe » Fri Feb 21, 2020 8:25 pm

Remember that QM must obey no-signalling. So models like these must also pass no-signalling to be valid. Do they?
minkwe
 
Posts: 1441
Joined: Sat Feb 08, 2014 10:22 am

Re: Simulation with non-local behavior

Postby FrediFizzx » Fri Feb 21, 2020 8:35 pm

minkwe wrote:Remember that QM must obey no-signalling. So models like these must also pass no-signalling to be valid. Do they?

Probably not. It is pretty hokey anyways since only station B knows both A's angle and A's outcome. I mean, how could it know A's outcome with no-signaling? And why only B?
.
FrediFizzx
Independent Physics Researcher
 
Posts: 2905
Joined: Tue Mar 19, 2013 7:12 pm
Location: N. California, USA

Re: Simulation with non-local behavior

Postby minkwe » Fri Feb 21, 2020 8:47 pm

FrediFizzx wrote:
minkwe wrote:Remember that QM must obey no-signalling. So models like these must also pass no-signalling to be valid. Do they?

Probably not. It is pretty hokey anyways since only station B knows both A's angle and A's outcome. I mean, how could it know A's outcome with no-signaling? And why only B?
.

It is possible to convert it into a variant that does not require knowledge of outcomes but just knowledge of settings. But that does not take away the difficulty of no-signalling which is not permitted by QM. Too often people present such non-local models thinking it reflects what is happening in QM. But that couldn't be further from the truth. For a while the Bell proponents have been asking for local simulations that match QM but nobody has asked them to produce non-local simulations that match QM and all the required conditions like no-signalling. I think looking at what they come up with and the difficulties they face will be instructive.

I'm in the process of coming up with a straight-forward full-proof test of no-signalling. Stay tuned.
minkwe
 
Posts: 1441
Joined: Sat Feb 08, 2014 10:22 am

Re: Simulation with non-local behavior

Postby gill1109 » Fri Feb 21, 2020 11:32 pm

minkwe wrote:For a while the Bell proponents have been asking for local simulations that match QM but nobody has asked them to produce non-local simulations that match QM and all the required conditions like no-signalling. I think looking at what they come up with and the difficulties they face will be instructive.
I'm in the process of coming up with a straight-forward full-proof test of no-signalling.stay tuned

Exciting!

Want to see a *non-local* simulation that matches QM and all required conditions? It goes like this
Code: Select all
Repeat N times
     Pick two settings a, b however you like
     Pick two outcomes x, y from the joint probability distribution  p(x, y | a, b) according to QM's EPR-B model.
gill1109
Mathematical Statistician
 
Posts: 2812
Joined: Tue Feb 04, 2014 10:39 pm
Location: Leiden

Re: Simulation with non-local behavior

Postby minkwe » Sat Feb 22, 2020 10:44 am

gill1109 wrote:
minkwe wrote:For a while the Bell proponents have been asking for local simulations that match QM but nobody has asked them to produce non-local simulations that match QM and all the required conditions like no-signalling. I think looking at what they come up with and the difficulties they face will be instructive.
I'm in the process of coming up with a straight-forward full-proof test of no-signalling.stay tuned

Exciting!

Want to see a *non-local* simulation that matches QM and all required conditions? It goes like this
Code: Select all
Repeat N times
     Pick two settings a, b however you like
     Pick two outcomes x, y from the joint probability distribution  p(x, y | a, b) according to QM's EPR-B model.

Sorry, but in case you did not know, QM does not permit signalling like that. You can't use (a,b) together at any station to obtain outcomes. Otherwise, Alice and Bob can easily communicate using entanglement, which is forbidden. Go back to the drawing board.
minkwe
 
Posts: 1441
Joined: Sat Feb 08, 2014 10:22 am

Re: Simulation with non-local behavior

Postby Heinera » Sat Feb 22, 2020 12:20 pm

minkwe wrote:
gill1109 wrote:
minkwe wrote:For a while the Bell proponents have been asking for local simulations that match QM but nobody has asked them to produce non-local simulations that match QM and all the required conditions like no-signalling. I think looking at what they come up with and the difficulties they face will be instructive.
I'm in the process of coming up with a straight-forward full-proof test of no-signalling.stay tuned

Exciting!

Want to see a *non-local* simulation that matches QM and all required conditions? It goes like this
Code: Select all
Repeat N times
     Pick two settings a, b however you like
     Pick two outcomes x, y from the joint probability distribution  p(x, y | a, b) according to QM's EPR-B model.

Sorry, but in case you did not know, QM does not permit signalling like that. You can't use (a,b) together at any station to obtain outcomes. Otherwise, Alice and Bob can easily communicate using entanglement, which is forbidden. Go back to the drawing board.

Nope. Even with Richard's model, there is no way that Alice can signal to Bob (or vice versa) by using detector settings. No matter what setting Alice chooses, the probability distribution on Bob's end will still be 50/50. And of course if you had known even a whiff about quantum mechanics you would know that entanglement requires a distribution that depends on both a and b, but still is consistent with the no-signalling theorem.

For this model implemented in R see https://rpubs.com/heinera/16727
Heinera
 
Posts: 917
Joined: Thu Feb 06, 2014 1:50 am

Re: Simulation with non-local behavior

Postby minkwe » Sat Feb 22, 2020 4:09 pm

Heinera wrote:Nope. Even with Richard's model, there is no way that Alice can signal to Bob (or vice versa) by using detector settings. No matter what setting Alice chooses, the probability distribution on Bob's end will still be 50/50. And of course if you had known even a whiff about quantum mechanics you would know that entanglement requires a distribution that depends on both a and b, but still is consistent with the no-signalling theorem.

For this model implemented in R see https://rpubs.com/heinera/16727

Of course you don't understand what it means to send information. It means the mutual information between Alice's setting and Bob's outcome and vice versa is significantly non-zero. Which means Bob can learn something about Alice's settings just by looking at his outcomes and vice versa. Which is obviously the case for Richard's model and yours.
minkwe
 
Posts: 1441
Joined: Sat Feb 08, 2014 10:22 am

Re: Simulation with non-local behavior

Postby Heinera » Sun Feb 23, 2020 3:16 am

minkwe wrote: Which means Bob can learn something about Alice's settings just by looking at his outcomes and vice versa. Which is obviously the case for Richard's model and yours.

And exactly how can Bob learn about Alice's setting just by looking at his outcomes? Can you show us a protocol Bob can follow to gain this information?
Heinera
 
Posts: 917
Joined: Thu Feb 06, 2014 1:50 am

Re: Simulation with non-local behavior

Postby minkwe » Sun Feb 23, 2020 6:36 am

I don't have to. You should learn some information theory. All I have to show is that the mutual information between Bob's settings and Alice's outcomes is significantly non-zero. This means information has been transmitted. The mutual information exactly quantifies the amount of information transmitted.
minkwe
 
Posts: 1441
Joined: Sat Feb 08, 2014 10:22 am

Re: Simulation with non-local behavior

Postby Heinera » Sun Feb 23, 2020 11:36 am

minkwe wrote:I don't have to. You should learn some information theory. All I have to show is that the mutual information between Bob's settings and Alice's outcomes is significantly non-zero. This means information has been transmitted. The mutual information exactly quantifies the amount of information transmitted.


Dodging the question again? You wrote "Which means Bob can learn something about Alice's settings just by looking at his outcomes and vice versa. Which is obviously the case for Richard's model and yours." So, what "obvious" analysis does Bob have to do to learn something about Alice's settings just by looking at his outcomes?

I think that it is you who need to learn some information theory. There is no information about Alice's settings in Bob's results, and vice versa.
Heinera
 
Posts: 917
Joined: Thu Feb 06, 2014 1:50 am

Re: Simulation with non-local behavior

Postby minkwe » Sun Feb 23, 2020 2:26 pm

Please, do you know what mutual information means? Do you understand what it means for the mutual information to be significantly non-zero?

Don't speak about things you don't understand. It is embarrassing.
minkwe
 
Posts: 1441
Joined: Sat Feb 08, 2014 10:22 am

Re: Simulation with non-local behavior

Postby Heinera » Sun Feb 23, 2020 2:45 pm

minkwe wrote:Please, do you know what mutual information means? Do you understand what it means for the mutual information to be significantly non-zero?


Do you understand anything about information theory at all, except what you've learned from pop-sci books? Since you are clearly incapable of answering the question of how Bob can extract information about Alice's settings "just by looking at his outcomes," this discussion has come to an end.
Heinera
 
Posts: 917
Joined: Thu Feb 06, 2014 1:50 am

Next

Return to Sci.Physics.Foundations

Who is online

Users browsing this forum: No registered users and 69 guests

cron
CodeCogs - An Open Source Scientific Library